THE PROCESS : ENGRAVE-A-CRETE

CARE AND MAINTENANCE

Ordinary dirt and grime can be removed by rinsing with a garden hose. For stubborn areas, we recommend a push broom to loosen dirt. Mineral deposits from hard water should be washed off on a regular basis to prevent stubborn build up. Fresh oil drippings can be wiped off the surface with a rag or paper towel. Tire marks, oil stains, crayon marks, and all other tough stains may be removed by using Simple Green® or Fast Orange Hand Cleaner®, and a soft bristle brush or cloth. Rinse thoroughly after cleaning. Do not use a wire brush to scrub surface or paint thinners, acids, or any type of solvent on the surface.

How the Modified Cement System Works >

 

How the Engrave-A-Crete System Works

  Surface Preparation
  Cleaning the Concrete
  Let's Discuss Cracks
  Let's Talk Stain
  Engraving Operations
Care and Maintenance

How the Modified Cement System Works

  Features of the Modified Cement System
  How does this product bond to concrete?
  Will my concrete still heave in the winter?
  Is it affected by cold weather?
  How does it stand up against oils, stains, salts and discoloration?
  Will it wear or chip off?
  What are the color choices?
  Is there a warranty?
  How is it maintained properly?
  What about expansion joints, are they covered up?
  Can cracks be repaired?
  Can it be applied around pools?
  How soon can it be used after application?
  What surfaces can it be applied to?